TGSG-06A sound and light alarm
product manual
TGSG-06A sound and light alarm product overview
Large-scale cranes and other walking equipment are very important equipment in metallurgical enterprises. It is used frequently in open-air operations, has a small start-up sound, and is quick in speed. It is prone to safety accidents because it is not noticed by field personnel. The TGSG-06A integrated sound and light alarm produced by our factory is a special alarm developed for the work characteristics and structural characteristics of large-scale lifting machines. It uses a variety of voice prompts and is easier for the on-site operation personnel to distinguish and further improve. Production safety. At the same time, the product can also be applied to other places that require alarm.
Application area
Steel plants, coking plants, metallurgical plants, chemical plants;
Mines, smelters;
Large-scale lifting machinery and engineering vehicles;
Banks, government agencies, postal services, telecommunications, hotels, buildings, factories, shopping malls, shops, villas, ATMs;
Perimeter systems, security services companies, etc.
Features
25W alarm sound - loud voice, can be customized according to user requirements, decibels have 130dB;
Weatherproof circuit process design - waterproof, dustproof, reliable quality;
Lights, siren integration - easy to install and powerful
220V triggered alarm - simple operation, long service life;
Product parameters
description
parameter
model
TGSG-06A
type of light source
LED red/yellow/blue/green/white warning light
Application area
Application lifting machinery, door hangers, bridge cranes, ports, docks, etc.
Operating Voltage
DC24V/AC48V/AC110V/AC220V/AC380V (AC36V can be customized)
Power frequency
50-60Hz
Operating temperature
-30°C~+70°C
Protection level
IP54
power
25W
size
204W*170L*415H(width*height*thickness)mm
Tone (single selection)
Police siren, air defense sound, engineering sound 1, engineering sound 2, fire sound, whistle, road accent, voice prompt (special tune can be customized)
Sound decibels: 130 dB
TGSG-06A sound and light alarm
#FormatImgID_0#
Product Size
Installation and commissioning
1. When the installation operation is performed, it must be powered off, otherwise the sound and light alarm may be burned out;
2, should check the power supply and alarm rated voltage is consistent;
3, the warning light should be installed when the installation, using expansion screws wall mounted;
4, to determine the exact wiring, and then start the power (DC to distinguish between positive and negative);
5, to ensure sound and light alarm ground;
6. Periodically detect the performance of sound and light alarms during use, and repair them if damaged;
Precautions
1. Sound and light alarms should be installed in places where the staff can easily see and hear;
2. Avoid noise, high power noise and other interferences around the sound and light alarm;

Plastic Film Granulating Machine

Zhejiang Kehao Plastic Machinery Co., Ltd. , https://www.khplasticmachinery.com