Smear truck owner calls reflected that these days his suction truck cold car is difficult to start, the engine is also shaking at idle speed powerful, power is also reduced significantly, ask how it is, Hubei Chusheng Sewage Truck manufacturers engineers may be sucking The ignition coil of the dirty car broke down, and the owner asked, "Is the ignition coil broken and needs to be replaced? Engineers say this: The role of the ignition coil is to convert the low-voltage electricity generated by the suction truck battery or generator to high voltage, which will cause a strong spark in the spark plug electrode, thereby igniting the air-fuel mixture in the cylinder. That is to say, in a sewage suction truck, the role of the ignition coil is like a transformer, which instantaneously converts a voltage of 12 volts into a voltage of 20,000 to 30,000 volts. The sewage suction truck needs such a large voltage to operate normally. The problem with the ignition coil may be that the outer plastic package of the coil is broken or the copper wire inside is broken. This will cause the sewage suction truck to shake. This is related to driving conditions. Some vehicles that have been damaged for years are bad. For the owner, to make the ignition coil ignition coil used for a long time, on the one hand to pay attention to the use of spark plugs, the use of aging spark plug will increase the work load of the ignition coil, and pay attention to the car's water temperature, water temperature high ignition coil Easy to burn. Ignition coil damage time will not be too long, if there is already a problem, the other should also be in a short time failure, so the sewage suction car manufacturer's engineers recommend that you replace the 4 sewage pump ignition coil At the same time, it is possible to reserve the ignition coil for which no problem has occurred yet. N-Ethylpyridinium Chloride,Cas 2294-38-4,N-Ethylpyridinium Chloride 2294-38-4,Pyridine Ionic Liquids Henan Tianfu Chemical Co.,Ltd , https://www.hnionicliquids.com