Fuel consumption is an important measure for truck users to purchase a car. It is particularly concerned by the users. The key to saving money depends on the engine. It is necessary to know that the engine burns hard money for the truck. Today Xiao Bian tells everyone about a Xichai engine's fuel-saving driving skills. Three modes meet the needs of any transport mode As we all know, many times the reason for high fuel consumption is the unreasonable distribution of power, such as the phenomenon of “big horse-drawn carts†and “little horse-drawn carts†that cause improper combustion of the engine. In the face of different load conditions of the vehicle, the Xichai engine has a reasonable segmentation of the output power, so that different transport conditions can "enjoy" the most reasonable horsepower output. In the actual driving of the user, it is only necessary to switch the engine mode reasonably according to his own actual load. For example, to liberate the Xichai AWEI engine mounted on the J6, it has three fuel-saving switches of no load, half load, and full load. Meet user transportation needs. We take the Xican 6DL2 as an example. The 350ps electronically controlled common-rail engine is divided into three modes, which are reflected in the vehicle's three fuel-saving profiles. The symbols are "0", "1", and "2". Among them, "0" means "empty", "1" means "half-load" and "2" means "full load." According to the vehicle load condition, the driver toggles the "dial wheel" on the switch to the corresponding gear position. "0" file idle mode When the vehicle is at no-load or less than half-load, the "0" position can be used. When the "0" position is used, the engine power is 240 hp. At this time, the engine power is the minimum and the fuel consumption is the lowest, which can effectively avoid idling or light load. Fuel wasted. "1" file half load mode When the vehicle is half-loaded or the light-load road is not smooth, it needs to use the "1" gear position. At this time, if the "0" position is used, the power will be insufficient, resulting in slow driving, increased engine running time, and increased fuel consumption. The use of "2" stalls will result in wasted power. When the fuel saving switch is in the "1" position, the engine power is 280 horsepower, and the power and fuel consumption are more appropriate at this time. "2" file full load mode When fully loaded, it needs to use the “2†full load mode. “2†can fully release the power of the engine, up to 350 horsepower, which can make the vehicle full of goods easy to run. At this time, although the fuel consumption is large, The oil consumed is fully utilized, creating better value and achieving the purpose of fuel economy. There are many ways to fuel-efficient driving, and it is undoubtedly the most convenient and practical fuel-saving method for users of Xichai. Comprehensive consideration of the volume of goods and road conditions, the use of a fuel-saving switch, can receive unexpected results. Fuel saving effect. Round Downpipe Roll Forming Machine
Round Downpipe Roll Forming Machine is used for building, it can as rain gutter uses.
This machine includes one set decoiler, guiding equipment, main roll forming machine, PLC control system, hydraulic cutting and receving table.
It has two cutting modes: flying saw cutting and mould cutting.
Specifications:
Decoiler - Feeding guide - Main roll forming machine - PLC control system - Hydraulic cutting - Receiving table
Pictures of machine:
Training and Installation : Round Downpipe Roll Forming Machine,Gi Round Downpipe Roll Forming Machine,Gl Round Downpipe Roll Forming Machine,Round Downpipe Roll Cold Forming Machine YingYee Machinery and Technology Service Co.,Ltd , https://www.yingyee.cn
Raw material
PPGI or GI
Material thickness range
0.2-0.8mm
Rollers
18 rows
Material of forming rollers
45# steel with chromed
Shaft diameter and mateiral
76mm, material is 40Cr
Material of cutting blade
Cr12 mould steel with quenched treatment
Forming speed
12-15m/min(excluding cutting stoping time)
Main motor power
4 KW
Hydraulic station power
3KW
Mode of cutting
Hydraulic cutting or flying saw cutting or mould cutting
Control system
PLC Frequency Control System with touch screen
Working process:
1. We offer installation service local in paid, reasonable charge.
2. QT test is welcome and professional.
3. manual and using guide is optional if no visiting and no installation.
Certification and after service:
1. Match the technology standard, ISO producing certification
2. CE certification
3. 12 months warranty since the delivery. Board.
Our advantage:
1. Short delivery period.
2. Effective communication
3. Interface customized.