Drying equipment principle
The double-cone rotary vacuum dryer is a double-cone rotary tank. Under a vacuum state, the tank is heated by passing steam or hot water into the jacket, and heat is brought into contact with the wet material through the inner wall of the tank. The moisture vapor evaporated after the wet material absorbs heat is pumped through a vacuum pump via a vacuum pump. Because the inside of the tank is in a vacuum state, and the rotation of the tank makes the material continuously move up and down and inside and outside, the drying speed of the material is accelerated, the drying efficiency is improved, and the purpose of uniform drying is achieved.
Overview
The double cone rotary vacuum dryer is a new type of dryer that combines mixing and drying. The condenser, vacuum pump and dryer are matched to form a vacuum drying device. (If there is no need to recover the solvent, the condenser may not be used.) The machine is advanced in design, simple in internal structure, easy to clean, all materials can be discharged, operation is simple, labor intensity can be reduced, and working environment can be improved. At the same time, the material also rotates but has energy due to the rotation of the container itself, and the material is even and dry, with good quality. It can be widely used in the drying of materials such as pharmaceuticals, chemical foods and dyes, and meets the requirements of “G MP”.
Features
When the oil is heated, the automatic temperature control can be used to dry the biochemical products and mineral raw materials. The temperature is between 20~200°C and the temperature difference is within ±2°C.
High thermal efficiency, more than 2 times higher than normal oven. Indirect heating, materials will not be contaminated, in line with "GMP" requirements, equipment maintenance, easy operation, easy to clean.
Application
This machine is suitable for vacuum drying and mixing of powder and granular materials in the pharmaceutical, food, chemical and other industries. It is especially suitable for materials with the following requirements;
1. Heat-sensitive materials that cannot withstand high temperatures;
2, easily oxidized, dangerous materials
3, the need to recover solvent and toxic gas materials;
4. Materials with extremely low residual volatile content are required;
5, require a full, homogeneous material

Hoisting Mechanism And Spare Parts

A Tower Crane has three main mechanisms, that is hoisting mechanism, slewing mechanism and trolleying mechanism.

Hoisting Mechanism and Spare Parts mainly include Tower Crane Lift Motor ( Tower Crane Hoist Motor ), Tower Crane Axial Fans, Tower Crane Hoisting Reducer, Winding Drum, Steel Wire Rope , Safety Brake and other related spare parts. The mechanism has the advantage of compact structure, stable operation, low noise and long service life, ect.

Other spare parts for tower crane: Steel Structure ( Mast Section , Fixing Angle , Anchorage Frame ,etc.), Tower Crane Cabin , Load Moment Indicator , Tower Crane Telescoping Hydraulic System, Tower Crane Gear , Brake Disc , Wire Rope, Tower Crane Power Cable, Electric Parts , Tower Crane Pulleys , Tower Crane Control Console


Hoisting Mechanism,Tower Crane Lift Motor,Tower Crane Axial Fans,Tower Crane Hoist Motor, Tower Crane Hoisting Reducer

SHEN YANG BAOQUAN BUSINESS CO., LTD , https://www.sytopkittowercrane.com