Just after the New Year, many people just got to work but received a recall message from the car manufacturer. According to the information released by the AQSIQ, in January 2017, a total of 25 automobile brands issued a recall notice involving multiple models in China, involving 588,117 vehicles. Although the number of car recalls in January this year was less than 600,000, and it was close to the Spring Festival holiday, but after the first time in 2016, the total number of recalls exceeded 10 million, and after hitting a record high, the frequency of recalls last month was not reduced. Slow, and still speeding up. A total of more than 30 recall notices have been issued, and the average has reached the rhythm of “one-day call”, which is a phenomenon that is less common in recent years. And it has been the big-name Audi that recalled nearly 580,000 A5 and Q5 in the world, and BMW recalled more than 40,000 cars in China, and they all accidentally climbed the headlines.
Judging from the reasons for the recall, the safety hazard of airbags is still the most prominent. In addition, the General Administration of Quality Supervision, Inspection and Quarantine has repeatedly reminded the news of the relevant recall notice: before the vehicle has not been recalled, it must be carefully driven. If the problem is found, stop using the vehicle immediately and seek the help of the dealer. After the recall operation begins, Contact your dealer for repairs as soon as possible.
Hyundai Tucson Since February 13, 2017, Beijing Hyundai Motor Co., Ltd. recalled a total of 96,094 new Tucson vehicles produced between September 5, 2015 and May 11, 2016.
Release time: The reason for the recall on January 3, 2017: The vehicle within the scope of this recall is not strong enough in the rear traction arm. If the parking brake is not released or the reverse acceleration is reversed, if the one-side rear wheel hits the shoulder, In extreme cases, the rear towing arm may be subjected to bending due to a large impact force, and may break after prolonged use. The company will replace the improved left and right rear towing arms for free for vehicles within the recall range.
Changan CX20 and Ouliwei Chongqing Changan Automobile Co., Ltd. filed a recall plan with the AQSIQ and decided to recall the following vehicles, totaling 185,299 vehicles: 1. From now on, recalled from March 20, 2014 to March 2, 2016 (including) the production of CX20 cars, a total of 76,657; Second, since March 1, 2017, recalled Changan Ouliwei cars produced from November 7, 2012 to November 13, 2015 (inclusive), involving 108,642 vehicles .
Release time: January 3, 2017 recall reasons: Some CX20 cars in this recall range, due to supplier reasons, the mounting holes on the steering wheel for assembling the driver's side airbags are out of size, in the event of a collision and the driver When the side airbag is detonated, in extreme cases, the airbag may be disengaged from the steering wheel. The company will replace the driver's side airbag mounting bolts for the vehicles within the recall range for free. Due to the manufacturer's manufacturing reasons, some of the Ouliwei vehicles in this recall have abnormally worn the torque sensor that turned to the upper axle assembly after long-term use, causing the controller to enter the fault protection state. In extreme cases, the steering assistance of the vehicle will decrease and turn. Heavy, the company replaced the steering axle assembly for free replacement of vehicles within the scope of the recall.
BMW, MINI, Rolls-Royce Since February 24, 2017, BMW Brilliance Automotive Co., Ltd. and BMW (China) Automobile Trading Co., Ltd. recalled the following vehicles, totaling 1,279 vehicles: 1. BMW Brilliance Automotive Co., Ltd. recalled in 2016 10 Some domestic Brilliance BMW 520Li, 525Li, 528Li and 535Li vehicles produced during the period from 20th to October 27th, totaling 619 vehicles; 2. BMW (China) Automobile Trading Co., Ltd. recalled from August 19th to 2016 Some of the imported BMW 420i, 430i, 520i, M4, Mini ONE, COOPER, COOPER S, JCW and Rolls-Royce Dawn vehicles were produced during the October 25th period, totaling 660 vehicles.
Release time: January 3, 2017 recall reason: The vehicle within the scope of this recall caused the airbag to fail to develop normally according to the requirements of the supplier, increasing the risk of injury to the vehicle occupants. The above-mentioned company will be the vehicle within the scope of the recall. The inspection is carried out free of charge, and the airbag module is replaced according to the inspection result, and the inventory vehicle will also be sold after the defect is eliminated. At the same time, it is recommended that relevant users should drive carefully to avoid collisions.
BMW X5, X6
Since January 6, 2017, BMW (China) Automobile Trading Co., Ltd. has recalled some imported X-series vehicles. According to the company's statistics, there are 65 vehicles in mainland China. The details are as follows: 1. The 2015 imported BMW X5 vehicles produced during the period from June 22, 2015 to September 12, 2015, totaling 56; 2. Production from June 26, 2015 to July 29, 2015 The 2015 model imported BMW X6 cars, a total of nine.
Release time: January 6, 2017 recall reason: Some vehicles in this recall range may not be tightened according to the standard torque due to the grounding wire position between the DME (vehicle engine electronic control unit) and the engine block. During the process, the bolt may loosen due to bumps, causing the DME voltage to drop, resulting in a power outage or restart. If a fault occurs during the running of the vehicle, the engine will be turned off or restarted after the DME is powered off or restarted. This situation increases the possibility of a traffic accident in the vehicle. The company will inspect the vehicles within the scope of the recall free of charge and tighten the grounding wire bolts of the engine control unit to the correct torque based on the inspection results. The engine fault light will illuminate when the fault occurs and the meter will display a fault message.
Volkswagen Beetle, Golf Travel Edition Since February 6, 2017, Volkswagen (China) Sales Co., Ltd. has recalled some imported Beetle and Golf Travel Edition cars. According to the company's statistics, there are a total of 49,480 vehicles in mainland China. The details are as follows: 1. Partially imported 2013-2016 Beetle series cars produced during the period from July 1, 2012 to August 6, 2015, totaling 44,718; Second, July 1, 2012 to July 2013 Part of the production of the 2012-2013 golf travel version of the car produced during the 6th period, a total of 4762.
Release time: January 6, 2017 recall reasons: Some vehicles within the scope of this recall may have deviations during the noise filter installation of the brake booster, which may cause the user to appear after using the cruise control function for a long time. When the warning light is on and the brake pedal is hard, it affects the normal braking performance of the vehicle. The company will entrust the Volkswagen brand to import authorized car dealers, check the brake booster vacuum for vehicles within the recall range and upgrade the software for free, and replace the brake booster if necessary. At the same time, it is recommended that the relevant users temporarily stop using the cruise control function before the implementation of the recall. If the above problems are found in the vehicle, they should immediately contact the authorized dealer to properly handle the vehicle.
JEEP Free Light Since January 10, 2017, Chrysler (China) Automobile Sales Co., Ltd. recalled some of the imported 2014-2015 free light series cars produced between November 5, 2012 and October 31, 2014. According to the company's statistics, there are 17,230 vehicles in mainland China.
Release time: January 6, 2017 recall reason: The partial pressure line of the transmission harness of some vehicles in this recall range is improper, resulting in intermittent high resistance condition, which may cause the gear to accidentally move to neutral. The company will refresh the transmission software for vehicles within the recall, replace the transmission harness if necessary, and the inventory vehicle will be sold after the defect has been eliminated. At the same time, it is recommended that the relevant users should drive carefully. If the gear is found to be abnormal during use, stop at a safe place as soon as possible and restart the vehicle to restore power.
Since January 19, 2017, Volvo Cars (Shanghai) Co., Ltd. has recalled some imported cars. According to the company's statistics, there are 513 vehicles in mainland China. The details are as follows: 1. Imported 2017 S60 vehicles produced between August 28, 2016 and October 5, 2016, totaling 4 vehicles; 2. Production from August 28, 2016 to October 5, 2016 Imports of 2017 V40 vehicles, totaling 338 vehicles; 3. Imports of 2017 V40CC vehicles from August 28, 2016 to October 5, 2016, totaling 47 vehicles; IV. August 30, 2016 The total number of imported 2017 V60 vehicles produced during the period from October 21, 2016 to the total of 99 vehicles; 5. The total number of imported 2017 V60CC vehicles produced during the period from August 30, 2016 to October 21, 2016 18 vehicles; 6. The number of imported 2017 XC90 vehicles produced between August 29, 2016 and September 7, 2016, totaling 7 vehicles.
Release time: January 10, 2017 recall reason: The vehicle within the scope of this recall may cause one or more airbags to fail to unfold normally due to the manufacturer's manufacturing problems, increasing the risk of injury to the occupants. The company will replace the affected airbags for free within the scope of the recall, and the inventory vehicles will also be sold after the defects are eliminated. At the same time, it is recommended that relevant users should drive carefully to avoid collisions.
Ssangyong Ludi Since February 20, 2017, Ssangyong Motor (Shanghai) Co., Ltd. recalled some of the imported 2014 Ludi cars that were produced during the period from May 30, 2014 to October 29, 2014. According to the company's statistics, there are 446 vehicles in mainland China.
Release time: January 10, 2017 recall reasons: Some vehicles in this recall range have too high hardness due to the shock absorber rubber sleeve of the front shock absorber. Due to frequent road impact and spring shock, the front shock absorber bottom rubber sleeve There is a possibility of cracking and oil leakage at the solder joint. If driving continues in a cracked condition, the front shock absorber rubber sleeve may be broken at the welding point. The company will replace the front shock absorber with the rubber sleeve hardness adjusted for the vehicle within the recall range. At the same time, it is recommended that the relevant users find that the front shock absorber rubber sleeve is cracked and leaked at the welding point, and can safely drive to the 4S shop to replace the front shock absorber at a low speed.
Maserati LEVANTE
2017 car recall, BMW Brilliance recall, 2017 car recall, BMW Brilliance recall, airbag safety Since January 10, 2017, Maserati (China) Automobile Trading Co., Ltd. recalled from May 12, 2016 to December 15, 2016 Part of the production of imported 2017 Levante (LEVANTE) cars. According to the company's statistics, there are 221 vehicles in mainland China.
Release time: January 10, 2017 recall reason: The vehicle within the scope of this recall is under low-speed driving conditions, due to improper adjustment of the mixture by the engine control module, resulting in incomplete combustion of the mixture, which may cause the engine speed to be too low. . These defects may cause the transmission to enter neutral and in some cases may cause the engine to stall. The company will upgrade the engine control module software for vehicles involved in the recall, and the inventory vehicles will also be sold after the defects are eliminated. At the same time, it is recommended that the relevant users should try to avoid driving at a low speed. Once the above defects occur, the vehicle can be continued by restarting the engine.
Maserati LEVANTE
Since January 13, 2017, Maserati (China) Automobile Trading Co., Ltd. recalled some imported 2017 Levante cars produced between October 11, 2016 and November 15, 2016. According to the company's statistics, there are 36 vehicles in mainland China.
Release time: January 10, 2017 recall reason: The vehicle in the scope of this recall is not suitable for the design requirements in the gas generator due to the side curtain supplier problem, the gas in the air curtain on the right side The generator may not work properly. The above defects may cause the right side air curtain to not work properly in the event of a side collision of the vehicle. The company will replace the right side air curtain for vehicles within the recall range, and the inventory vehicles will also be sold after the defects are eliminated. At the same time, it is recommended that relevant users fasten their seat belts and drive carefully to avoid collisions.
Lincoln MKZ
Since June 30, 2017, Ford Motor (China) Co., Ltd. recalled part of the imported 2015 Lincoln MKZ produced from June 11, 2014 to July 31, 2014. According to the company's statistics, there are 316 vehicles in mainland China.
Release time: The reason for the recall on January 10, 2017: During the collision, some vehicles in the collision period will not be able to reach the restraint of the occupants due to the internal temperature generated by the seat belt pretensioner. The resulting tension, the front seat belt pretensioner cable on the driver's and passenger's side may be disengaged. This can result in the seat belt not being able to adequately restrain the occupant in the event of a collision, increasing the risk of injury to the occupant. The company will apply a viscous silicone coating to the seat belt pretensioner cable at the location of the recalled vehicle. At the same time, it is recommended that the relevant users drive carefully to avoid collisions.
Mercedes-Benz GLE
Since January 13, 2017, Dalian Huayu Automobile Import & Export Co., Ltd. recalled some imported Mercedes-Benz GLE vehicles produced between December 1, 2015 and May 1, 2016. According to the company statistics, China There are 8 vehicles in the mainland.
Release time: January 13, 2017 recall reason: Some vehicles in the scope of this recall have problems with the engine control unit software, which may cause the vehicle to unexpectedly turn off when it is about to stop. This problem increases the collision of the vehicle during normal driving. Risk, the company will upgrade the vehicle engine control unit software within the scope of the recall for free. At the same time, it is recommended that the relevant users should drive with caution. Once the above defects occur, the vehicle can be continued by restarting the engine.
Lexus IS, ES, LFA, GX
Since June 30, 2017, Toyota Motor (China) Investment Co., Ltd. has recalled some imported Lexus IS, ES, and LFA vehicles; since December 31, 2017, it has recalled some imported Lexus GX vehicles. According to the company's statistics, there are 15,865 vehicles in mainland China. The details are as follows: 1. Part of the imported Lexus IS250/IS250C sedan produced from January 6, 2012 to September 28, 2012, totaling 4,856; 2. Part of production from January 6, 2012 to June 5, 2012 Imported Lexus ES240/ES350 sedan for a total of 9,449 vehicles; 3. Partially imported Lexus GX400/GX460 off-road passenger vehicles produced from January 6, 2012 to September 26, 2012, totaling 1,557 vehicles; IV. January 17, 2011 A total of 3 Lexus LFA sedan imported from November 13th, 2012.
Release time: January 13, 2017 recall Reason: The airbags of some vehicles in this recall range are equipped with Takata's unsalted ammonium nitrate gas generator. When the airbag is deployed, the gas generator of the above airbag may be abnormally damaged, causing the debris to fly out and injuring the inside of the vehicle. The above-mentioned companies will handle the free replacement of vehicles within the scope of the recall. At the same time, it is recommended to avoid close to the ignition source or high temperature area before the vehicle safety hazard is eliminated.
Mercedes-Benz semi-trailer tractor Since January 16, 2017, Daimlerka Bus (China) Co., Ltd. recalled some Mercedes-Benz Actros 2646 produced between January 14, 2015 and February 12, 2016. (6×4) and Actros 2644 (6×4) series semi-trailer tractors. According to the company's statistics, there are 58 vehicles in mainland China.
Release time: January 16, 2017 recall reasons: During the recall, individual vehicles are driving, and the rotation of the transmission shaft between the rear axles causes the universal joint to overheat, so that the assembly clearance between the drive shaft and the universal joint As the mileage increases, it increases, causing noise and vibration, and may even cause the bushing or cross shaft of the universal joint to fall off. At the same time, the weld of the transmission shaft may crack under high stress, posing a safety hazard. The company will replace the rear axle-to-bridge transmission shafts for the affected vehicles to eliminate the defects. The relevant users should drive carefully. Once the vehicles in the above range are perceived to have gradually increasing and clear noise and vibration, the driver should To ensure safety, quickly park the vehicle to the side without delay and contact the Mercedes-Benz Truck Authorized Service Center.
Subaru XV
Since January 26, 2017, Subaru Motors (China) Co., Ltd. recalled some imported Subaru XV cars produced from January 19, 2016 to November 30, 2016. According to the company's statistics, there are a total of 483 vehicles in mainland China.
Release time: January 18, 2017 recall reason: Some vehicles in this recall range are improperly set due to the engine control unit control program. If the P-stop to N-range shifting operation is performed within a short time after the start-up operation, It may cause abnormal meshing of the starter gear and the torque converter ring gear. The impact during meshing will cause damage to the star gear, which may cause abnormal noise of the engine. In severe cases, the engine may not start again. The company will upgrade the engine control unit control program and check the vehicle for the vehicles within the scope of the recall. If the starter gear is damaged, the starter and torque converter will be replaced free of charge. The inventory vehicle will also be repaired after the defect is eliminated. Sales. At the same time, it is recommended that the relevant users should stop using the engine if they hear abnormal noise of the engine when starting the vehicle, and seek the help of the dealer as soon as possible.
Mercedes-Benz E-Class Coupe Since January 19, 2017, Mercedes-Benz (China) Automobile Sales Co., Ltd. recalled part of the production period from September 3, 2014 to March 2, 2016, 2015-2016 Imported E-Class coupe. According to the company's statistics, there are 5,738 vehicles in mainland China.
Release time: January 19, 2017 recall reason: Some vehicles in this recall range have incorrect software code for the parking light function. When the parking light switch is turned on, the parking light on the trunk lid may not be available. bright. The company will carry out free software upgrades for vehicles within the scope of the recall, and it is recommended that once the relevant owner of the vehicle finds such a situation, please go to the nearest authorized service provider for disposal.
Mercedes GL, GLE, GLS
Since January 19, 2017, Mercedes-Benz (China) Automobile Sales Co., Ltd. has recalled some of the 2016 imported GL-class, GLE SUV, and GLS SUV vehicles. According to the company's statistics, there are a total of 26,522 vehicles in mainland China. The details are as follows: 1. Some imported Mercedes-Benz GLE SUV vehicles produced from February 17, 2015 to March 29, 2016, totaling 24,463 vehicles; 2. August 3, 2015 to March 1, 2016 A total of 283 Mercedes-Benz GLS SUV vehicles were imported from Japan; 3. Some imported Mercedes-Benz GL-class vehicles produced from June 28, 2015 to April 1, 2016, totaling 1776 Car.
Release time: January 19, 2017 recall reason: Some vehicles may have calibration deviation in front passenger seat occupancy recognition system. If the light weight passenger is sitting at the front seat edge position and does not move for a long time This may cause the passenger to not be accurately recognized by the system and may be recognized as a child safety seat, causing the front passenger's front airbag to be automatically turned off by the system (the reminder light is on, and the corresponding prompt message will appear on the instrument panel). The company will carry out free software upgrades for vehicles within the scope of the recall, and it is recommended that relevant users should immediately go to the authorized service provider for disposal when they find that the instrument panel has an alarm.
Porsche 718 Boxster
From February 20, 2017, Porsche (China) Automobile Sales Co., Ltd. recalled some imported 2017 718 Boxster cars from September 28, 2016 to October 4, 2016. According to statistics, there are 7 vehicles involved in mainland China (both not delivered).
Published: January 20, 2017
2017 car recall, BMW Brilliance recall, 2017 car recall, BMW Brilliance recall, airbag safety recall reasons: Some vehicles within the scope of this recall are due to supplier manufacturing reasons, the internal chemical distribution ratio of the primary air generator of the side airbag of the driver's seat Improper, it may cause the airbag to fail to unfold normally after the collision of the vehicle, increasing the risk of injury to the vehicle occupants. The company will replace the side airbag module of the driver's seat for free for the vehicles within the recall range. It has been verified that all vehicles involved in the Chinese market have not been delivered to the user. To this end, the company will ensure that relevant replacement measures are completed before the vehicle is delivered.
Since March 1, 2017, Dongfeng Honda Automobile Co., Ltd. has recalled the following vehicles for a total of 39,631 vehicles: 1. The 2012 model Platinum Core (produced during the period from November 21, 2011 to July 13, 2012) SPIRIOR) sedan, a total of 11,400; Second, the 2012 model of the CIIMO sedan produced between January 26, 2011 and October 12, 2013, a total of 28,831 vehicles.
Release time: January 20, 2017 recall Reason: The passenger side airbag of the vehicle within this recall range is equipped with an ammonium nitrate gas generator without a desiccant produced by Takada. When the airbag is deployed, the airbag of the above airbag may be abnormally damaged, causing debris to fly out and injure the inside of the vehicle. The company will replace the passenger side front airbag gas generator for the vehicle within the recall range for free. The recall was carried out under the circumstances of the AQSIQ initiated defect investigation. Since June 2014, the General Administration of Quality Supervision, Inspection and Quarantine has conducted a defect investigation on the rupture of the high-altitude airbag gas generator, and issued a safety warning for the Takada airbag. Affected by the investigation, the company decided to take recall measures.
BYD F3-R, F3DM
Since January 24, 2017, BYD Auto Co., Ltd. recalled some BYD F3-R and F3DM sedan produced between May 14, 2009 and December 6, 2013, totaling 4,346 vehicles.
Release time: January 22, 2017 recall Reason: The electric power steering column assembly of the vehicle within this recall range is equipped with a contact torque sensor. Due to the manufacturer's manufacturing reasons, the brush and the sensor in the sensor after long-term use. Thick film resistors on the PCB may have abnormal wear, which in turn causes abnormal torque signals. It may happen that the EPS warning light is on, and in extreme cases it may cause the steering assistance of the vehicle to decrease and the steering to be heavy. The company will replace the improved electric power steering column assembly for free for vehicles within the recall.
Liana A6
Since February 24, 2017, Jiangxi Changhe Suzuki Automobile Co., Ltd. recalled the Liana A6 sedan produced between September 7, 2013 and April 28, 2015, for a total of 44,169 vehicles.
Release time: January 22, 2017 recall reason: The vehicle within the scope of this recall will cause the electronic power steering controller to be misjudged under certain circumstances due to the manufacturer's manufacturing conditions, resulting in the power steering to enter the safety protection state. In extreme cases The vehicle's steering power will be reduced and the steering will be heavy. The company will upgrade the electronic power steering controller technology for free for vehicles within the recall range.
The recall was carried out under the circumstances of the AQSIQ initiated defect investigation. For some time, the AQSIQ Defective Product Management Center received complaints from consumers that Liana A6's steering assistance was reduced and the steering was heavy. After receiving the complaint, the AQSIQ immediately deployed the Defective Product Management Center to conduct a defect investigation and assessment of the above issues. Affected by the investigation, the company decided to take recall measures.
Subaru Forester Since January 23, 2017, Subaru Motors (China) Co., Ltd. recalled some of the 2011-2012 forester series cars imported from September 29, 2010 to October 9, 2012. According to the company's statistics, there are 1,264 vehicles in mainland China.
Release time: January 23, 2017 recall reasons: Due to design problems, some of the vehicles in the scope of this recall may be melted and adhered to the relay of the secondary air pump, resulting in continuous operation of the air pump motor, which in turn leads to air pressure in the air pump. Ascending, the temperature of the air pump rises, and in severe cases, the resin parts may be melted, causing odor, smoke, or even fire. The company will replace the reset secondary air pump relay for the vehicles within the recall range, and remind the user to stop immediately if the engine warning light is on, the engine compartment cover is smoking, and the odor is emitted during driving. Use and immediately seek help from your dealer.
Infiniti QX60 Hybrid Since February 13, 2017, Nissan (China) Investment Co., Ltd. recalled some of the imported 2015 Infiniti QX60 Hybrid series cars produced between January 19, 2016 and February 5, 2016. According to the company's statistics, there are 205 vehicles in mainland China.
Release time: January 23, 2017 recall reasons: Due to the supplier's reasons, the specific parts of the individual fuel tanks are lower than the standard design thickness. If the fuel tank is strongly impacted, it may cause fuel leakage. The company will replace the new fuel tanks for vehicles within the scope of the recall, and remind the relevant users to drive as safely as possible to avoid collisions. If there is any abnormality, please go to the repair station for maintenance.
Iveco ZK5045XLJ2 type travel car (modified car)
Since January 24, 2017, Zhengzhou Yutong Bus Co., Ltd. recalled ZK5045XLJ2 type of residential vehicles produced from June 4, 2016 to October 31, 2016 (inclusive), totaling 36 vehicles.
Release time: January 24, 2017 recall reasons: The vehicles within the scope of this recall are based on the Iveco chassis modification, and the secondary parking brake cable with zinc-aluminum alloy joints may cause fatigue fracture of the cable joint due to material strength problems. Some or all of the functions of the parking brake are invalid, and there is a safety hazard. The above-mentioned company will entrust Iveco (China) Commercial Vehicle Sales Co., Ltd. to carry out the recall, and carry out free inspections for vehicles within the scope of the recall. All vehicles with secondary parking brake cables with zinc-aluminum alloy joints are replaced free of steel. Pull the cable for the connector. And remind the relevant users to stop the manual gearbox into the first gear or reverse gear before stopping the hidden danger, the automatic gearbox is hung in the P gear, or the pad is placed under the tire.
Pentium B50
Since January 24, 2017, FAW Car Co., Ltd. recalled some Pentium B50 (1.4T) cars produced from September 8, 2016 to December 17, 2016, totaling 3,067.
Release time: January 24, 2017 recall reasons: Some vehicles within the scope of this recall have engine leakage fuel fuel risk due to supplier manufacturing reasons. In extreme cases, the vehicle may spontaneously ignite. The above companies will check and replace the fuel injection pump for free for vehicles within the scope of the recall.
Since February 20, 2017, Volkswagen and Audi have recalled the following vehicles from Volkswagen (China) Sales Co., Ltd., SAIC Volkswagen Automotive Co., Ltd. and FAW-Volkswagen Automotive Co., Ltd., a total of 8,418 vehicles: 1. Volkswagen (China) Sales A total of 21 2017 Magotan travel series cars produced by the company from July 27, 2016 to August 12, 2016; 2017 produced from September 20, 2016 to October 6, 2016 The annual Matewei multi-function commercial vehicle model has a total of 8 vehicles. Involved in the front airbag of the driver; Second, some of the 2016 Tiguan vehicles produced by SAIC Volkswagen Co., Ltd. from October 24, 2016 to November 4, 2016, totaling 325 vehicles. Involving the front airbag problem of the front passenger; Third, some of the domestic 2017 Audi A6L produced by FAW-Volkswagen Automotive Co., Ltd. from September 13, 2016 to November 11, 2016, a total of 6512 vehicles; October 18, 2016 A total of 932 Audi A4Ls, which were produced in Japan on December 8th, were sold. 434 domestic Audi A6L and 1 vehicles with front seat belts were replaced at Audi dealers after September 12, 2016. Domestic Audi A4L. The above vehicles are involved in the problem of the front seat belt pretensioner; 4. The imported from September 7, 2016 to October 20, 2016 imported by FAW-Volkswagen Automotive Co., Ltd.: part of the 2017 Audi A7, a total of 48 vehicles Part of the 2017 Audi A8L, a total of 123; part of the 2017 Audi A6 allroad, a total of 12; the 2017 Audi S6 and the 2017 Audi RS6 each. The above vehicle relates to the passenger seat seat belt pretensioner problem.
Release time: Reasons for recall on January 24, 2017: Some vehicles within the scope of this recall, due to supplier manufacturing reasons, the chemical distribution ratio of the primary gas generator is improper, which may lead to the related vehicles involved in the collision of the vehicle. The airbag or seat belt pretensioner does not work properly. For the above-mentioned imported Magotan and Maitewei vehicles, the relevant companies will replace the driver's front airbag module for the vehicles within the scope of the recall free of charge; for the above-mentioned domestic Tiguan vehicles, the relevant companies will be free of charge for the replacement of the front passengers involved in the vehicle. Airbag module; for the above-mentioned domestic Audi A6L and A4L, imported Audi A7, A8L, A6 allroad, S6 and RS6 cars, the relevant company will entrust the Audi franchisee to replace the front row double for the vehicles in the scope according to the actual test results. Side or single side seat belt module.
Jaguar XF
Since February 6, 2017, Jaguar Land Rover (China) Investment Co., Ltd. has recalled some of the imported Jaguar XF series cars from 2013 to 2015 produced between May 1, 2013 and June 15, 2015. According to the company's statistics, there are 22,338 vehicles in mainland China.
Published: January 24, 2017
2017 car recall, BMW Brilliance recall, 2017 car recall, BMW Brilliance recall, airbag safety recall reasons: Some vehicles in the scope of this recall do not maintain sufficient clearance between the fuel supply pipe and the vehicle bottom guard and the body, which may lead to fuel Tube wear and, in extreme cases, can cause gasoline to leak, posing a major safety hazard that could cause a fire. The company will check the fuel pipes for free for vehicles within the recall and replace them if necessary, and will install two additional pipe clamps. And remind the relevant users that if there is a gasoline leak in the use or smell of gasoline in the car, stop using the vehicle and contact the dealer for disposal. At the same time, it is recommended to avoid close to the ignition source or high temperature area before the vehicle safety hazard is eliminated.
Jeep Grand Cherokee, Chrysler 300C
Since January 25, 2017, Chrysler (China) Automobile Sales Co., Ltd. has recalled some imported Jeep Grand Cherokee and Chrysler 300C vehicles. According to the company's statistics, there are a total of 54,305 vehicles in mainland China. The details are as follows: 1. Part of the 2014-2015 model imported from July 16, 2012 to December 22, 2015, Jeep Grand Cherokee, a total of 45,326 vehicles; Second, February 15, 2011 to Part of the production of the Chrysler 300C from 2013 to 2014 during the period of November 27, 2014, totaling 8,979 units.
Release time: January 25, 2017 recall reasons: Some vehicles within the scope of this recall, when the driver is parking, may not shift the gear to the parking block, the vehicle does not have the function of stopping the above misoperation. In the case where the driver mistakenly believes that the gear is already in the park and the engine is in operation and the driver does not activate the parking brake, if the driver leaves the vehicle, the vehicle may be touched and injured. The company will inspect the vehicles within the recall and refresh the software for free. The new software adds an “automatic parking” function and an additional reminder card describing the new software is placed in the car as a user manual. Appendix. It is recommended that the relevant user should drive carefully. In order to ensure that the vehicle's transmission is already in the park, the driver should observe the gear shift indicator on the shift lever or on the vehicle's dashboard. Confirm that the vehicle's transmission is already in the park and start the station. Only leave the vehicle after braking.
Volkswagen Magotan From February 20, 2017, Volkswagen (China) Sales Co., Ltd. recalled some of the imported Magotan travel series, the Magotan four-wheel drive series, which was produced from February 9, 2016 to June 2, 2016. According to the company's statistics, there are a total of 1993 vehicles (including stock vehicles) in mainland China. The details are as follows: 1. Part of the imported 2016 Magotan travel series cars produced during the period from February 9, 2016 to May 30, 2016, totaling 1,476 vehicles; 2. From February 9, 2016 to June 2, 2016 Part of the production of imported 2016 Magotan four-wheel drive series of cars, a total of 517.
Release time: January 25, 2017 recall reasons: Some vehicles within the scope of this recall may have headlights (including low beam, high beam, daytime due to calibration problems in the vehicle body control module (BCM) Driving lights, fog lights, or turn signals are not recognized when a failure occurs, the warning light does not light, or the warning light in the instrument panel is abnormally lit when there is no problem with the lights. The company will entrust Volkswagen brand imported car authorized dealers to freely refresh the body controller software for vehicles within the recall range. At the same time, remind relevant users to pay attention to the working status of the lights and warning lights before the implementation of the recall work. If the above problems are found in the vehicle, please contact the nearest Volkswagen authorized dealer for disposal.
Land Rover New Range Rover, Jaguar XJ
Since February 3, 2017, Jaguar Land Rover (China) Investment Co., Ltd. has recalled some of the imported Land Rover new Range Rover, the new Range Rover Sport, and the Jaguar XJ. According to the company's statistics, there are 297 vehicles in mainland China, as follows: 1. Some of the imported road models that were produced during the period from September 7, 2016 to October 5, 2016, a total of 94 vehicles; a total of 94 vehicles; Part of the imported 2016 Land Rover new Range Rover Sport, which was produced between September 8 and October 6, 2016, totaling 176 vehicles; 3. Partial imports from September 6, 2016 to October 21, 2016. The 2017 Jaguar XJ has a total of 27 vehicles.
Release time: January 25, 2017 recall reasons: Due to the manufacturer's manufacturing reasons, the mixing ratio of the internal actuator of the airbag is deviated, which may result in the front passenger airbag not being able to collide after the collision of the vehicle. The normal deployment as required increases the risk of injury to the vehicle occupants. The company will replace the airbag module free of charge for vehicles within the scope of the recall, and the inventory vehicle will also be sold after the defect has been eliminated. At the same time, it is recommended that relevant users should drive carefully to avoid collisions.
Land Rover New Range Rover, Jaguar XE, Jaguar F-TYPE
Since February 24, 2017, Jaguar Land Rover (China) Investment Co., Ltd. has recalled some of the imported Land Rover new Range Rover, the new Range Rover Sport, the Jaguar XE, and the Jaguar F-TYPE. According to the company's statistics, there are 6,438 vehicles in mainland China, as follows: 1. Some of the imported roads from July 12, 2016 to October 26, 2016 will be landed by the Land Rover in the 2016~2017 year, totaling 1,554 vehicles; Part of the imported 2016~2017 Lulu new Range Rover Sport, which was produced between July 12, 2016 and October 26, 2016, totaling 3,438 vehicles; 3. Production from July 13, 2016 to December 7, 2016 Some imported Jaguar XE in 2017, a total of 1132 vehicles; Fourth, part of the 2017 Jaguar F-TYPE imported from July 19, 2016 to December 16, 2016, a total of 314 vehicles.
Release time: January 25, 2017 recall reason: The vehicle within the scope of this recall is due to supplier manufacturing reasons, the mixing ratio of the internal starter of the seat belt pretensioner is deviated, which may cause the vehicle to collide before The seat belt pretensioner cannot work as required, increasing the risk of injury to the vehicle occupants.该公司将免费为召回范围内车辆进行检查,并依据检查结果更换安全带总成,库存车辆也将在消除缺陷后进行销售。同时,建议相关用户应谨慎驾驶,避免发生碰撞事故。
大众途威、迈腾自2017年2月20日起,大众汽车(中国)销售有限公司召回部分进口途威、迈腾系列汽车。据该公司统计,中国大陆地区共涉及1950辆。具体如下:一、2011年9月14日至2013年8月20日期间生产的配备了2.0TDI柴油发动机的部分进口2012年-2014年款途威汽车,共计1946辆;二、2008年2月20日至2008年3月3日期间生产的配备了2.0TDI柴油发动机的部分进口2008款迈腾汽车,共计4辆。
发布时间:2017年1月26日召回原因:此次召回范围内的车辆由于安装了特定的发动机控制模块软件,会导致部分车辆的尾气排放检测数值在实验室检测时与实际道路行驶时存在差异。该公司将委托授权经销商免费为受影响车辆更新发动机控制系统相关软件。
小编总结:面对接踵而来的汽车召回事件,不少消费者心中犯嘀咕:工艺水平和核心技术都在进步,怎么车子质量越造越差呢?
事实上,人无完人,车也一样,一辆汽车需要成千上万的零部件组装而成,加之如今电子化、智能化程度的提高,只要某一个或几个部件出现质量瑕疵,或者组装环节出现工艺问题,就有可能导致产品缺陷,引发召回事件。此外,在汽车制造平台化和零部件通用的趋势下,因某一批次零部件存在缺陷而导致大规模召回的事件也时有发生,影响了半个汽车界的“高田门”就是一个活生生的例子。所以,召回事件层出不穷,连豪华品牌也没能置身事外,就不足为奇了。
目前,大多数汽车召回事件,都是汽车厂家的主动召回,承担了为召回车辆免费检修、更换配件的义务。某种程度上来说,召回是值得表扬的行为,因为这是汽车厂家负责任的表现。
当然,对于消费者来说,回厂维修毕竟是一件花费时间和精力的事情,能免则免。这也是缺陷汽车召回制度的意义所在,不仅保障消费者合法权益,也在不断地促进汽车生产制造工艺的提高,保障汽车市场安全有序的发展。

The rack roll forming machine includes one decoiler, servo feeder, hydraulic punching, roll forming and hydraulic cutting. The products of the rack roll forming machine are used as racks and shelves for supporting the daily commodities in supermarkets and shops.

1.Fast speed

2.Elegant appearance

3.PLC control, full automatic

4.Manufacture as buyer's requirements


Specifications:

Raw material Colored steel, Galvanized steel
Material thickness range 1.5-3.0mm
Rollers 18-24 rowa(according to drawings and size)
Material of rollers 45# steel with chromed
Shaft diameter and material 80mm, material is 40Cr
Material of cutting blade Cr12 mould steel with quenched treatment
Forming speed 6-8m/min(include the punching)
Way of driven Chain transmission or Gear box
Controlling system Siemens PLC
Main motor power 15KW
Hydraulic station power 11KW
Voltage 380V/3Phase/50Hz or at buyer's request
Size of the machine L*W*H 12m*2.0m*1.6m

Working process:

Working process

Decoiler - Seven rollers leveling - Servo feeding - Power press - Material guiding - Main roll forming machine 

- PLC control system - Hydraulic cutting (45°) - Receiving table


Pictures for machine:

storage rack roll forming machine

Storage rack roll forming machine

Storage rack roll forming machine

upright

upright

upright

upright



Training and Installation :
1. We offer installation service local in paid, reasonable charge. 
2. QT test is welcome and professional.
3. manual and using guide is optional if no visiting and no installation. 

Certification and after service:

1. Match the technology standard, ISO producing certification 
2. CE certification 
3. 12 months warranty since the delivery. Board. 

Our advantage:

1. Short delivery period. 
2. Effective communication 
3. Interface customized. 

Storage Upright Roll Forming Machine

Storage Upright Roll Forming Machine,Storage Racking Upright Roll Forming Machine,Lms Storage Upright Roll Forming Machine,Punchig Storage Upright Roll Forming Machine

YingYee Machinery and Technology Service Co.,Ltd , https://www.yingyee.cn