Polo Shirts,Hollowed-Out Girls Summer T-Shirt,Red Hollowed-Out Girls Summer T-Shirt,Blend Girls T-Shirt For Summer,Cotton Linen Blend Girls T-Shirt XUANZI GARMENT CO.,LTD. , https://www.xzgirldress.com
Anti-static clothing is made of special anti-static clean fabrics. This fabric uses special polyester filaments, with warp or weft-inlaid conductive fibers. With high efficiency, permanent anti-static, dust-proof performance, thin, clear texture features. In the process of making garments, a special overlock machine is used to effectively reduce the generation of particles. Anti-static clothing testing equipment as an important anti-static clothing anti-static performance of the testing equipment, in the use of the process must follow the operating procedures and precautions, the following are some of the equipment in the test need to pay attention to matters:
First, the fabric friction electric charge tester is to measure the charge of the antistatic clothing after the friction charged test equipment, the use of the process should pay attention to the following points:
1, the supporting Faraday tube outer cylinder should be reliably grounded
2. Zero the charge measuring device before every experiment
3, measured objects must be out of power
4. Turn on the power switch to warm up the machine for 15 minutes before the test
5, Lined overalls should turn the lining outwards, cold clothes should be removed after the liner test lining and lining
6. The roller friction machine should be placed on a stable tabletop or on the ground to prevent the operation from swinging and generating large noise
7. Do not put pins, coins, and other sharp metal objects into the roller friction machine to avoid damage to the lining cloth.
8, anti-static overalls test environment conditions for the temperature (20 ± 5) °C, relative humidity of 40%
Second, the point to point resistivity tester is a testing device for testing the resistivity of anti-static clothes. Please pay attention to the following points during use:
1, built-in battery and external power supply, can only choose one of the power supply, it is generally recommended to select the external power supply
2. When the instrument is not in use, place it in a dry and ventilated place
3, if the use of built-in battery power, long-term when not in use, please remove the battery from the battery compartment, so as not to leak liquid corrosion equipment
4, non-professional maintenance personnel shall not open the instrument cover to prevent the shock from high voltage inside the machine. Freely open the cover to disassemble and modify the internal components of the instrument may lose the qualification of the instrument or increase the cost of repair
5. Never use corrosive fluxes such as hydrochloric acid or solder paste to solder the measuring leads, connectors, or internal components of the instrument to avoid irreparable leakage failure.
Suzhou Sun and Moon Star Electrostatic Purification Technology Co., Ltd.