The main function of the edge banding is to seal the cross-section of the board, so as to avoid the damage of the board and the adverse factors (mainly moisture) in the process of use and prevent the formaldehyde inside the board from volatilizing, and at the same time achieve the effect of beautiful decoration.
The product has the following main features: smooth surface, no blistering, no ribbing, moderate gloss, smooth surface and back surface, uniform thickness, uniform width, reasonable hardness, high elasticity, good quality, strong wear resistance, trimmed and sealed The color of the side and the side is close to the surface color, not whitish, good gloss, and the overall color of the finished furniture is coordinated.
Judge good or bad PVC Edge Banding For Cabinet,Pvc Edge Banding,Banding For Cabinet,T Shape Pvc Edge Banding For Kitchen Cabinet Henan Shunbang Chemical Industry CO.,Ltd , https://www.pvcresinchemical.com
1. Look at the hue and surface roughness of the edge banding strip. The color of the surface of a good edge banding strip is also very important. Whether the color is close to the customized product and is gorgeous. If the surface is very rough and there are pull marks, the quality is definitely not much better. This is the surface quality of the edge banding strip. It has nothing to do with the quality of the inner material of the edge banding, mainly the production process of the edge banding factory and the production technical skills of the employees. A good edge banding strip is: the surface must be smooth, no blistering or seldom bubbling, no drawing or few drawing, moderate gloss, not too shiny or too matte (unless there are special requirements).
2. Check the flatness of the surface and bottom of the edge banding and whether the thickness is uniform, otherwise it will cause the joint between the edge band and the board, the glue line is too eye-catching or the gap between the board and the edge band is too large, which will affect the overall beauty. Details determine success or failure, and often a small detail problem may bring an embarrassing situation where the overall effect is not good.
3. Whether the edge trimming is whitish, whether the surface of the bent edge strip is severely whitish, and whether the ground color of the trimming strip is close to the surface color of the board in question. PVC Edge Banding strips are mainly made of PVC and Calcium Carbonate plus additives. If the calcium carbonate content is too high, whitening of the edge banding and bending will occur, which proves that the quality of such products is not good.
4. Whether the strength is okay and whether there is elasticity. High strength means good wear resistance, and the corresponding quality is better. Too high strength also means increased processing difficulty. Low elasticity means low wear resistance and low aging resistance. In addition, according to actual production needs, manual trimming is generally required, and soft spots can be made appropriately, and the automatic edge banding machine can make hard points appropriately.
5. Whether the adhesive is applied evenly and whether it is easy to fall off during use.
6. Smell whether the PVC edge banding strips taste or not. Products produced with good quality raw materials generally have a small taste. If the taste is too large, it means that the quality of the raw materials used in production is relatively poor.
**Product Specifications**
Model NO.: 477
Plastic: ABS, PC, PP, PA, POM, PVC, PMMA, PBT, PEEK
Metal: Aluminum, Steel, Brass, Magnesium Alloy
Our Service 1: CNC Machining, 4 Axis, 5 Axis
Our Service 2: Vacuum Casting Mold
Our Service 3: SLA/SLS/3D Printing
Our Service 4: Low Volume Production
Our Service 5: Lathing/Turning Process
Our Service 6: Rapid Injection Tooling
Our Service 7: Sheet Metal
Our Service 8: Laser Cutting
Trademark: DHL
Transport Package: Carton
Specification: 300*300*250mm
Origin: China
HS Code: 3926909890
**Product Description**
| **Material available** | Stainless steel, aluminum, brass, Plastic (ABS, POM, PC, PC+GF, PA, PA+GF, PMMA, acrylic, PEEK, PEI, etc.) |
| **Process** | 1. CNC machining (4 axis & DMG 5 axis)
2. Vacuum Casting
3. SLA/SLS/3D PRINTING
4. Low volume production
5. Lathing/turning process
6. Rapid Injection Tooling
7. Sheet Metal |
| **Surface treatment** | 1. As Machined
2. Sand Blasting
3. Powder Coating
4. Smooth Finish
5. Anodizing
6. Chrome Plating
7. Gloss or Matt Color
8. Many More Custom Coatings & Finishes |
| **Tolerance** | ±0.05 mm |
| **Application** | Equipment/Machinery, Medical & Technological parts, Automotive/motorcycle parts, Telecommunication parts, Power tool parts, Bicycle parts, Agricultural parts, Hardware |
| **Delivery** | By DHL, FEDEX |
**Product Images**
[Image 1]
[Image 2]
[Image 3]
[Image 4]
**Packing & Delivery**
Packing Details: Packed by paper carton or wooden case.
Delivery Details: Shipped by Express, delivery time about 4-7 days.
**Company Info**
Bohao Prototype is one of the largest professional rapid prototyping companies in China. With highly experienced staff and advanced technology, we deliver high-quality products at competitive prices with fast lead times. We help you create prototypes that save time and cost, offering solutions for a wide range of industries from initial design to low-volume production.
We specialize in CNC milling and turning, vacuum casting, SLA/SLS (3D printing), sheet metal forming, injection molding, extrusion, and rapid tooling. Our factory covers 2,500 m² with over 100 skilled employees, including engineers, and 30 high-quality CNC machines. We also have a CMM (Coordinate Measuring Machine) for precise measurements.
**FAQ**
1. What's your MOQ?
A: 1 piece is available.
2. Are you a manufacturer?
A: Yes, we are an integrated industry and trading company. Welcome to visit our factory.
3. How does the ADL control the quality?
A: During processing, operators inspect each size themselves. After the first part is completed, it is checked by QA. Before shipment, QA inspects according to ISO sampling standards.
4. What's the payment term?
A: 50% deposit, 50% balance by T/T before shipment.
5. What's the delivery time?
A: Normally 3–7 working days for samples, 12–30 working days for mass production. Urgent parts can be processed quickly.
6. What is the standard of package?
A: Bubble Wrap/Pearl Wool to prevent scratches. Outer packaging is wooden case or carton box depending on the product. Custom packaging is also available.
7. How can I get the quotation?
A: Start an inquiry, send your 2D and 3D files, and receive accurate and attractive pricing quickly.