Model NO.: FW-180
Condition: New
Model: Fw-180
Exhauster Method: Entrapment Vacuum Pump
Structure: Reciprocating Vacuum Pump
Trademark: cnruihua
Transport Package: Carton
Specification: 60.2*28*31.8mm
Origin: Wenzhou
Model NO.: FW-180
Condition: New
Model: Fw-180
Exhauster Method: Entrapment Vacuum Pump
Structure: Reciprocating Vacuum Pump
Trademark: cnruihua
Transport Package: Carton
Specification: 60.2*28*31.8mm
Origin: Wenzhou

Fw-180 Ozone Generator Air Pump

Item Descritpion:

2000 Pairs Sells per Month
5 pairs MOQ
48-72 hours delivery after received money
Fw-180 Ozone Generator Air Pump

 
Flow : 2.6l/min
Pump Pressure: 4.5 PSI (30 Kpa)
Power Requirement: 220V/50Hz,120V/60Hz, AC24V available
Power Consumption: 10 W
Pump Design: Double diaphragm, duckbill valves
Pump Body: Aluminum?
Outlet & Inlet Dia: 0.3" (7.6 mm)
Electrical Connections: 1-ft (300 mm) Insulated wire pair
Noise Level: 40 dB unconnected, connected operation will reduce dB level.
Fw-180 Ozone Generator Air Pump

 
Fw-180 Ozone Generator Air Pump

Item Descritpion:

2000 Pairs Sells per Month
5 pairs MOQ
48-72 hours delivery after received money
Fw-180 Ozone Generator Air Pump

 
Flow : 2.6l/min
Pump Pressure: 4.5 PSI (30 Kpa)
Power Requirement: 220V/50Hz,120V/60Hz, AC24V available
Power Consumption: 10 W
Pump Design: Double diaphragm, duckbill valves
Pump Body: Aluminum?
Outlet & Inlet Dia: 0.3" (7.6 mm)
Electrical Connections: 1-ft (300 mm) Insulated wire pair
Noise Level: 40 dB unconnected, connected operation will reduce dB level.
Fw-180 Ozone Generator Air Pump

 

   T10 Belt Fastener can apply to a variety of conveyor belts, the width of which vary from 7.5mm to 16mm. It is suitable for linking the deep-trough conveyor belts of which the groove angle is over 45 degree. With the interlaced structure of the pin body, the density of the fasteners is greatly lowered. And the fasteners are directly embedded into the pin body, which makes it durable and resistant to abrasion.


Size

T10/22#

T10/24#

T10/26#

T10/28#


The Thickness of the Conveyor Belt

7.5-9.5mm

10-12mm

12-14mm

14-16mm


The Strength of the Conveyor Belt

≦1000

≦1250

≦1400

≦1600

Pst10 001

T10 Belt Fastener

Matches with T10,Equipped with Lever Devices,T10 Manual Installation Tool,Fastener Installation Tools 7.5-9.5mm

Huozhou Coal and Electricity Group Bailong Industry and Trade Co., Ltd. , https://www.hltransportbeltbuckle.com