CFD 3-11 (part 3)

Firefighters direct a hand line into the front of the carpet store after companies were pulled out of the building. Behind them, the foam transmission system is visible as high-expansion foam is being injected into the structure. Tim Olk photo

A shot of sector 1 after the fire broke through the roof shows several hand lines in operation, along with elevated master streams from Squad 1 and Tower Ladder 21. Tim Olk photo

Firefighters work to position the baskets in order to find a spot that will allow them to direct their master streams for maximum impact. Before they can begin flowing water again, they use hand tools to gain access behind the mansard facia. Tim Olk photo

Foam unit 6-3-1 is aligned with the front door of the store to provide access for applying the foam. Water is added to the foam concentrate, and the fans blow the foam through a large tube, forcing it into the building to extinguish the basement fire. The foam is very light, and some of it blows out along the street. Tim Olk photo

This shot beautifully illustrates the foam delivery procedure and the obvious overflow that is inherent with this application. The 4-foot diameter tubing allows the fire department to send a tremendous volume of foam into the building. Tim Olk photo

Another view from sector 1 shows Squad 1 directing their master stream through the mansard facia into a hole created when the large sign fell away. The elevated position and proximity of the firefighter in the bucket provide for much greater accuracy in the placement of the stream than can be achieved by hand lines or master streams directed from street level. Tim Olk photo