Mold Cavity Technology: CNC Milling
Milling Speed: Normal Speed
Parts Detection Method: Measurement of Three Axis NC
Trademark: xinchang
Transport Package: Wooden Case
Mold Cavity Technology: CNC Milling
Milling Speed: Normal Speed
Parts Detection Method: Measurement of Three Axis NC
Trademark: xinchang
Transport Package: Wooden Case
50mm oblique hole fin die
  1. Feed progression:50mm
  2. Parts:19 parts per stroke as the drawing show 
  3. Material: Temper H18
  4. Fin stock thickness range: 0.12~0.18mm
  5. Feed: internal hitch finger pull type
  6. Cut off: guillotine type cut off with plain grind insert blades.
  7. Heating hole stage:only one type as the drawing show.
  8. Standard production rate: 100-180 strokes per minute.
  9. Every guide post has lubrication
  10. This die consists of forming stage, long hole pierce station, reflare,heating hole stage,    edgetrim , slit, feeding and cut off station. We will use four ball cages, guide posts and bushings in the main die
  11. Lifespan: 300 million times of punching (300,000,000)
60mm oblique hole fin die
1.   Feed progression:60mm.
2.   Parts:19 parts per stroke as the drawing show
3.   Material: Temper H18
4.   Fin stock thickness range: 0.12~0.18mm
5.   Feed: internal hitch finger pull type
6.   Cut off: guillotine type cut off with plain grind insert blades.
7.   Heating hole stage:two type as the drawing show.
8.   Standard production rate: 100-180 strokes per minute
9.   Every guide post has lubrication
10.  This die consists of forming stage, long hole pierce station, reflare,heating hole stage, Edgetrim, slit, feeding and cut off station. We will use four ball cages, guide posts and bushings in the main die
11. Lifespan: 300 million times of punching (300,000,000)
 
FIN DIE Material and standard component
We made our FIN DIE use the best quality material from JAPAN or SWEDEN. The following form shows some of our material used in the FIN DIE.
  MATERIAL HARDNESS COUNTRY
DRAW PLATE NAK80 HRC40-42 JAPAN
DRAW PUNCH AND DIE SKD11 HRC60-62 JAPAN
REFLACE PUNCH AND DIE SKD11 HRC60-62 JAPAN
LOUVER PUNCH AND DIE ASP30 HRC62-64 SWEDEN
PIERCE PUNCH AND DIE ASP30 HRC62-64 SWEDEN
SLITTER BLADE ASP30 HRC62-64 SWEDEN
EDGE TRIM BLADE ASP30 HRC62-64 SWEDEN
CUT OFF BLADE ASP30 HRC62-64 SWEDEN
 
We choose the best standard components in the world to use in our FIN Line and machines(such as MISUMI and SMC). We will give all the list (size,type,grade)of the standard components to you when our die would be delivered along with the assembly drawing and spare parts drawing for the fin die.
 
   WARRANTY:
We warrants to the purchaser is free of defective materials and workmanship for a period of 12 month it does not cover damages or failures due to improper use of our machines or beyond its rated capacity.
  50mm oblique hole fin die
  1. Feed progression:50mm
  2. Parts:19 parts per stroke as the drawing show 
  3. Material: Temper H18
  4. Fin stock thickness range: 0.12~0.18mm
  5. Feed: internal hitch finger pull type
  6. Cut off: guillotine type cut off with plain grind insert blades.
  7. Heating hole stage:only one type as the drawing show.
  8. Standard production rate: 100-180 strokes per minute.
  9. Every guide post has lubrication
  10. This die consists of forming stage, long hole pierce station, reflare,heating hole stage,    edgetrim , slit, feeding and cut off station. We will use four ball cages, guide posts and bushings in the main die
  11. Lifespan: 300 million times of punching (300,000,000)
60mm oblique hole fin die
1.   Feed progression:60mm.
2.   Parts:19 parts per stroke as the drawing show
3.   Material: Temper H18
4.   Fin stock thickness range: 0.12~0.18mm
5.   Feed: internal hitch finger pull type
6.   Cut off: guillotine type cut off with plain grind insert blades.
7.   Heating hole stage:two type as the drawing show.
8.   Standard production rate: 100-180 strokes per minute
9.   Every guide post has lubrication
10.  This die consists of forming stage, long hole pierce station, reflare,heating hole stage, Edgetrim, slit, feeding and cut off station. We will use four ball cages, guide posts and bushings in the main die
11. Lifespan: 300 million times of punching (300,000,000)
 
FIN DIE Material and standard component
We made our FIN DIE use the best quality material from JAPAN or SWEDEN. The following form shows some of our material used in the FIN DIE.
  MATERIAL HARDNESS COUNTRY
DRAW PLATE NAK80 HRC40-42 JAPAN
DRAW PUNCH AND DIE SKD11 HRC60-62 JAPAN
REFLACE PUNCH AND DIE SKD11 HRC60-62 JAPAN
LOUVER PUNCH AND DIE ASP30 HRC62-64 SWEDEN
PIERCE PUNCH AND DIE ASP30 HRC62-64 SWEDEN
SLITTER BLADE ASP30 HRC62-64 SWEDEN
EDGE TRIM BLADE ASP30 HRC62-64 SWEDEN
CUT OFF BLADE ASP30 HRC62-64 SWEDEN
 
We choose the best standard components in the world to use in our FIN Line and machines(such as MISUMI and SMC). We will give all the list (size,type,grade)of the standard components to you when our die would be delivered along with the assembly drawing and spare parts drawing for the fin die.
 
   WARRANTY:
We warrants to the purchaser is free of defective materials and workmanship for a period of 12 month it does not cover damages or failures due to improper use of our machines or beyond its rated capacity.
 

PVC Wall Panel

Pvc Wall Panel,Indoor Wall Board,Integrated Wallboard,Ecological Wall Panel

Puyang Shangyi Decoration Material Co., Ltd. , https://www.shangyiwallpanel.com