Chemical Agitators Liquid and Powder Mixer
High quality portable electric liquid mixer
Â
·Smooth and steady rotation, even stirring
·Blades and axis are made of stainless steel
·Can be used in great volume and great depth liquid agitation after matched with underwater support seat
Selection of model
| Model | Power(KW) | Reduction ratio | Rotate speed | Shaft length (mm) | Shaft diameter (mm) | Blade diameter (mm) | Maximum volume(Low to high concentration)(L) |
| QLJ 30-75-11 | 0.75 | 11 | 134 | 1500 | 30 | 350 | 5000-2500 |
| QLJ 30-75-17 | 17 | 88 | 400 | ||||
| QLJ 30-75-23 | 23 | 65 | 550 | ||||
| QLJ 30-75-29 | 29 | 51 | 700 | ||||
| QLJ 30-75-35 | 35 | 43 | 800 | ||||
| QLJ 30-75-43 | 43 | 35 | 900 | ||||
| QLJ 30-75-59 | 59 | 25 | 1000 |
Â
*Note:Shanghai QILEE has the right to revise the specification.Product Application
The mixing tank is suitable for water supply and drainage engineering, mixing dissolution reaction tank and various chemicals.
Specifications
Accessories
Contact
Â
According to the characteristics of molding, injection mold and thermoplastic plastic mold are divided into two types. According to the molding process, it can be divided into transfer mold, blow mold, casting mold, hot molding mold, hot pressing mold (compression mold), injection mold, etc. Among them, the hot pressing mold can be divided into three types, i.e., overflow, semi-overflow and non-overflow, and the injection mold can be divided into two types, i.e., cold runner mold and hot runner mold. It can be divided into two types: mobile type and fixed type.
Plastic Injection Accessories,Injection Molded Leakproof Accessories,Plastic Handles For Boxes,Black Plastic Handles,Plastic Injection Molding Service
Timeplex Industrial Limited , https://www.timeplexhk.com